Thermal Break for Concrete-to-Concrete. Schöck Isokorb®.

  • Isokorb® minimizes thermal bridges, saving energy and reducing CO2 emissions.
  • Isokorb® avoids building damages and contributes to healthy indoor air quality by eliminating the risk of condensation and mould.
  • Isokorb® adds sustainability and contributes towards LEED certification.

Schöck Isokorb® type CM. For cantilever concrete slabs.

Schöck Isokorb® type CM - for cantilever concrete slabs Schöck Isokorb® type CM - for cantilever concrete slabs

The Schöck Isokorb® type CM is a load bearing thermal insulation element for cantilever concrete slabs such as balconies. The element transfers bending moment stress and shear forces. The integrated hanging and perimeter tensile reinforcement, fitted as standard, saves the unnecessary and costly use of extra stirrups or hooped mat.

Schöck Isokorb® type CMD. For "run-through" concrete slabs.

Schöck Isokorb® type CMD - for "run-through" concrete slabs Schöck Isokorb® type CMD - for "run-through" concrete slabs

The Schöck Isokorb® type CMD is a load bearing thermal insulation element for concrete slabs which encroach into the floor slab area. It transfers positive and negative bending moment stress and shear forces.

Schöck Isokorb® type CV. For column supported concrete slabs.

Schöck Isokorb® type CV - for column supported concrete slabs Schöck Isokorb® type CV - for column supported concrete slabs

The Schöck Isokorb® type CV serves as a shear force transfer element for Loggia's or column supported concrete slabs such as balconies. Type CV transfers vertical shear forces from concrete slabs with continuous bearing.

Schöck Isokorb® type CVB. For column supported concrete slabs.

Schöck Isokorb® type CVB - for column supported concrete slabs Schöck Isokorb® type CVB - for column supported concrete slabs

The Schöck Isokorb® type CVB serves as a shear force transfer element for Loggia's or column supported concrete slabs such as balconies. Type CVB for transferring vertical shear forces from concrete slabs with t-beams.

Schöck Isokorb® type CEQ module.

The Schöck Isokorb® type CEQ module is a load bearing thermal insulation element for intermitted transfer of earth quake loads. It transfers horizontal shear or/and tensile forces parallel or/and perpendicular to the insulation layer as well as up-lift forces when used in addition with type CM. It is used in addition to linear connection (e.g. Type CM, type CV, type CMD).

Contact

Schöck USA Inc.
281 Witherspoon Street
Suite 110
Princeton, NJ 08540
Tel.: 855 572 4625 /
        855 5 Schöck
info@schock-us.com
Subscribe to Schöck newsletter

Downloads